For creating a rough white plaster underlayment to enhance adhesive properties on mineral substrates as well as for reducing and optimizing substrate absorption. Intended for priming mineral plasters, both for interior and exterior use (e.g. for ALPOL EKO PLUS EPS board-based and ALPOL EKO PLUS WM mineral wool-based thermal insulation systems.) The primer can also be used to prime acrylic plasters.
Product is a component of thermal insulation systems ALPOL EKO PLUS and ALPOL EKO PLUS WM.
Package
Single: 13 kg bucket
£48.00
Substrate type
Reinforcing layer of thermal insulation system, cement-lime plasters, concrete substrates.
Substrate preparation
The substrate should be firm, sound, dry, free from dust, dirt, and grease stains. Remove adhesive coats of poor adhesion and patch with a relevant thermal insulation adhesive.
Instructions for use
Carefully mix the primer before application. Repeat mixing while applying the primer to avoid sediment build-up on the container bottom. Do not thin with water. Apply with a brush, masonry brush or a roller, rubbing well against the substrate. In case of highly absorbing substrates repeat priming.
Tools
Brush, masonry brush or paint roller container.
Working conditions
Work in ambient and substrate temperatures between +5°C and +30°C. Do not add any other agents to the preparation. Protect freshly applied primer from excessive moisture and rain.
Storage
Store in original, unopened packages – shelf life 9 months from production date. Protect from freezing and overheating during transport and storage.
Notes
The specifications and instructions of use are given for the temperature (20±2)°C and relative humidity of air (65±5)%. The drying time may alter in different conditions. Contains mixture of isothiazolinones. May cause allergic reactions. Wear safety goggles. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. Protect your skin. Use protective clothing and gloves. Keep away from children. Use water for cleaning tools. The manufacturer accepts no responsibility for damage caused by unskilful or inappropriate use of the product.
General recommendations
Work according to building practice, observing health & safety standards and regulations as well as instructions of ALPOL EKO PLUS or ALPOL EKO PLUS WM thermal insulation systems, and the Building Research Institute (ITB) instructions No. 418/2007 and 447/2009.
| Specifications | |
| Composition: water dispersion of styrene-acrylic copolymer, mineral components, preservatives, pigments | |
| Volume density | approx. 1.6 kg/dm³ |
| Dry mass content | approx. 70% of the compound |
| Coverage | approx. 0.3 kg/m2 |
| Volatile organic compound (VOC) content | ≤ 30 g/l |
| Appearance: white, homogeneous, thick liquid | |
For creating a rough white plaster underlayment to enhance adhesive properties on mineral substrates as well as for reducing and optimizing substrate absorption. Intended for priming mineral plasters, both for interior and exterior use (e.g. for ALPOL EKO PLUS EPS board-based and ALPOL EKO PLUS WM mineral wool-based thermal insulation systems.) The primer can also be used to prime acrylic plasters.
Product is a component of thermal insulation systems ALPOL EKO PLUS and ALPOL EKO PLUS WM.
Package
Single: 13 kg bucket
| Weight | 13 kg |
|---|
Alpol Proffesional Building Materials is a nationwide distributor that specialises in the selling and distribution of Rendering , plastering and building materials. High quality with great results, 100% 5 star reviews. Bringing suppliers and manufacturers together as a community, with advice and support.
Alpol West Midland
+44 1384 671711
Leeds+01133455170
Alpol West Midland +44 1384 671711
Leeds +01133455170
