For rapid repairs of concrete, reinforced concrete and masonry building structures. For treating small damages of mineral plasters and repairs of cement underlay and floors. Due to high strength and short setting time, the mortar is suitable for setting bolts in foundations, columns in bell footing, and for masonry works in lower temperatures (however, above 0°C). Intended for interior and exterior use.
Package
Single: 25 kg bag
| Weight | 25 kg |
|---|
Related products
-
AT 315 SPC – HIGH POLYMER BASE COAT
Original price was: £15.00.£12.00Current price is: £12.00.In particular, it can be used as:
- undercoat or reinforcing and levelling layer (reinforced with fibreglass mesh) with a thickness of 4 to 15 mm, under thin-coat decorative mineral, silicate, silicate-silicone, silicone and mosaic plasters, under cement, gypsum and polymer plasters, as well as under ceramic, clinker, stone and stoneware tiles (including large-format tiles),
- patching layer from 4 to 6 mm thick, reinforced with fibreglass mesh in insulation systems with increased impact resistance, that use polystyrene or mineral wool,
- fine-grained thin-coat trowelled or felted finishing plaster,
- system plaster for single-layer walls made of cellular concrete,
- adhesive mortar for bonding polystyrene, mineral wool or other types of thermal and acoustic insulation boards to mineral substrates.
Delivery charges will be included
-
AP 410 Quick setting flow applied floor between 5 and 35 mm
£18.00For making quick setting flow applied floors from 5 to 35 mm thick, inside buildings. Can be used with electric underfloor heating systems. If this is […]
